Conforms to Certification: AWS A5.23 ASME SFA A5.23
Weld Process: Submerged Arc Welding Process
|AWS Chemical Composition Requirements|
|C = 0.10 max||Mn = 0.35 -0.70|
|Si = 0.05 -0.50||S = 0.025 max|
|P = 0.025 max||Cr = 4.50 – 6.50|
|Mo = 0.45 – 0.70||Cu = 0.35|
3/32 x 60c
1/8 x 60c
5/32 x 60c
This type wire is classified by the chemical composition of deposited weld metal in combination with a specific welding flux using the submerged welding process. The weld metal properties are obtained by the use of a properly selected flux and EB6 wire and knowing if the weldment is to be heat treated or as welded condition.
|Deposited Chemical Composition %(Typical)|
|C = 0.07||S = 0.010||Mo = 0.50|
|Mn = 0.60||P = 0.015||Cu = 0.20|
|Si = 0.39||Cr = 5.25|
Note: Using Neutral flux
|Mechanical Properties (Nominal Values) R.T.|
|Tensile Strength||72,000 psi|
Recommended Welding Parameter
Weld parameter dependent upon the wire diameter and welding flux being used.
Note: Both agglomerated and fused fluxes can be used for submerged arc welding.
Note:The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.