Conforms to Certification: AWS A5.23 ASME SFA A5.23
Weld Process: Submerged Arc Welding Process
|AWS Chemical Composition Requirements|
|C = 0.07 – 0.13||Mn = 1.25|
|Si = 0.50 max||S = 0.010 max|
|P = 0.010 max||Cr = 8.50 – 10.50|
|Ni = 1.00 max||Mo = 0.85 – 1.15|
|Cu = 0.10 max||V = 0.15 – 0.25|
|Nb = 0.02 – 0.10||N = 0.03 – 0.07|
|Al = 0.04 max|
3/32 x 55c
1/8 x 55c
This type wire is classified by the chemical composition of deposited weld metal in combination with a specific welding flux using the submerged welding process. The weld metal properties are obtained by the use of a properly selected flux and EB9 wire and knowing if the weldment is to be heat treated or as welded condition.
|Deposited Chemical Composition % (Typical)|
|C = 0.09||P = 0.009||Cu = 0.11|
|Mn = 1.00||Cr = 8.75||V = 0.19|
|Si = 0.20||Ni = 0.75||Nb = 0.03|
|S = 0.009||Mo = 0.90||N = 0.04|
|Al = 0.01|
Note: Using Neutral flux
|Mechanical Properties (Nominal Values) R.T.|
|Tensile Strength||100,000 psi|
|Yield Strength||85,000 psi|
Recommended Welding Parameter
Weld parameter dependent upon the wire diameter and welding flux being used.
Note: Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.