Call Us Today: 800-523-1266

103 Queens Drive | King of Prussia, PA

            ISO 9001:2015 Certified

ERNiCrMo-10

Class: ERNiCrMo-10

AWS: A5.14

Conforms to Certification: AWS A5.14           ASME SFA A5.14

Weld Process: GMAW, ASAW Welding Process

AWS Chemical Composition Requirements
C = 0.015 max Cu = 0.50 max
Mn = 0.50 max Ni = Remainder
Fe = 2.0 – 6.0 Co = 2.5 max
P = 0.02 max Cr = 20.0 – 22.5
S = 0.01 max Mo = 12.5 – 14.5
Si = 0.08 max V = 0.35 max
Other = 0.50 max W = 2.5 – 3.5

 

Available Sizes 
Diameter X Spool Sizes Diameter X Coil Sizes
.035 x 33# 1/16 x COIL
.045 x 33# 3/32 x COIL
1/16 x 33# 1/8 x COIL
5/32 x COIL

Application
ERNiCrMo-10 is used for welding nickel-chromium-molybdenum base materials to themselves, steel and other nickel base alloys, and for cladding steels. Can be used to weld duplex, super duplex stainless steels.

Deposited Chemical Composition % (Typical)
C = 0.008 Cr = 21.5 Ni = Balance
Fe = 3.1 Mo = 13.5 W = 3.0

 

Deposited All Weld Metal Properties % (AW) 
Tensile Strength 115,000 psi
Yield Strength 82,000 psi
Elongation 38%

Deposited Charpy-V-Notch Impact Properties %
Not applicable

Recommended Welding Parameters for MIG and SAW Welding of Nickel Alloys
Process Diameter of Wire Voltage (V) Amperage (A) Gas
MIG .035 inches 26 – 29 150 – 190 75 % Argon +25% Helium
.045 inches 28 – 32 180 – 220 75 % Argon +25% Helium
1/16 inches 29 – 33 200 – 250 75 % Argon +25% Helium
SAW 3/32 inches 28 – 30 270 – 350 Suitable Flux May Be Used.
1/8 inches 29 – 32 350 – 450 Suitable Flux May Be Used.
5/32 inches 30 – 33 400 – 550 Suitable Flux May Be Used.

Note: Other shielding Gases may be used for Mig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note:  Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.