Conforms to Certification : AWS A5.14 ASME SFA A5.14
Weld Process: GMAW & ASAW Welding Processes
|AWS Chemical Composition Requirements|
|C = 0.015 max||Cu = 1.5 – 2.5|
|Mn = 1.0 max||Ni = Remainder|
|Fe = 18.0 – 21.0||Co = 5.0 max|
|P = 0.04 max||Cr = 21.0 – 23.5|
|S = 0.03 max||Nb + Ta = 0.50 max|
|Si = 1.0 max||Mo = 6.0 – 8.0|
|W = 1.5 max||Other = 0.50 max|
Please Call For More Information and Available Sizes
ERNiCrMo-9 is used for welding nickel-chromium-molybdenum base materials to themselves, steel and other nickel base alloys, and for cladding steels.
|Deposited Chemical Compostition % (Typical)|
|C = 0.01||Cr = 22.0||Ni = Balance|
|Cu = 2.0||Mo = 7.1||Fe = 20.5|
|Co = 2.75|
|Deposited All Weld Metal Properties % (AW)|
|Tensile Strength||96,000 psi|
Deposited Charpy-V-Notch Impact Properties %
|Recommended Welding Parameters for MIG and SAW Welding of Nickel Alloys|
|Process||Diameter of Wire||Voltage (V)||Amperage (A)||Gas|
|MIG||.035 inches||26 – 29||150 – 190||75 % Argon +25% Helium|
|.045 inches||28 – 32||180 – 220||75 % Argon +25% Helium|
|1/16 inches||29 – 33||200 – 250||75 % Argon +25% Helium|
|SAW||3/32 inches||28 – 30||270 – 350||Suitable Flux May Be Used.|
|1/8 inches||29 – 32||350 – 450||Suitable Flux May Be Used.|
|5/32 inches||30 – 33||400 – 550||Suitable Flux May Be Used.|
Note: Other shielding Gases may be used for Mig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note: Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.