E430-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C=0.10 max | Si=0.90 max |
| Cr=15.0 – 18.0 | P=0.04 max |
| Ni=0.60 max | S=0.03 max |
| Mn=1.0 max | Mo=0.75 max |
| Cu=0.75 max | |
Application
E430-16 is highly resistant to chemical corrosion and to oxidation up to 300ºF. This electrode can be used for welding type 430 steel and type 410 when the Chromium content of the plate is on the high side.
| Deposited Chemical Composition % (Typical) | ||
| C=0.05 | Cr=16.40 | Si=0.42 |
| Mn=0.65 | P=0.023 | S=0.024 |
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 74,000 psi |
| Tensile Strength | 58,500 psi |
| Elongation | 23% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Available Sizes & Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E420-16
Conforms to Certification: AWS A5.4 ASME A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C=0.27 max | Si=0.38 max |
| Cr=12.70 max | P=0.021 max |
| Mn=0.40 max | S=0.024 max |
Application
E420-16 is structured for surface applications on carbon steels for good resistance to abrasion. Preheat and interpass temperature of more than 400ºF is recommended during welding use slow cooling.
| Deposited Chemical Composition % (Typical) | ||
| C=0.11 | Cr=10.90 | Si=0.28 |
| Mn=0.22 | P=0.017 | S=0.014 |
Deposited All Weld Metal Properties %
(Typical) As-Welded
Not Applicable
| Available Sizes & Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E410NiMo-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C=0.06 max | Si=0.90 max |
| Cr=11.0 – 12.5 | P=0.04 max |
| Ni=4.0 – 5.0 | S=0.03 max |
| Mo=0.40 – 0.70 | Mn = 1.0 max |
| Cu =0.75 max | |
Application
Type E410NiMo-16 is designed to weld materials of similar chemical composition in cast and wrought forms. Preheat and interpass temperature not less than 300F is recommended. Post-weld heat treatment should not exceed 1150F.
| Deposited Chemical Composition % (Typical) | ||
| C=0.05 | Cr=11.70 | Ni=4.5 |
| Si=0.40 | Mn=0.75 | Mo=0.50 |
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 134,000 psi |
| Tensile Strength | 123,000 psi |
| Elongation | 18% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E410-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C=0.12 max | Si=0.90 max |
| Cr=11.0 – 13.5 | P=0.04 max |
| Ni=0.70 max | S=0.03 max |
| Mo=0.75 max | Mn=1.0 max |
| Cu=0.75 max | |
Application
E410-16 electrodes are recommended for welding type 410 straight chromium steel. This alloy is used extensively for corrosion and oxidation resistance at elevated temperatures up to 1500ºF. Unlike the chromium-nickel stainless steels, this type is not subject to loss of corrosion resistance due to carbide precipitation.
| Deposited Chemical Composition % (Typical) | ||
| C=0.10 | Cr=12.20 | Si=0.52 |
| Mn=0.68 | P=0.021 | S=0.021 |
| Ni=0.65 | ||
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 79,000 psi |
| Tensile Strength | 63,500 psi |
| Elongation | 24% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Available Sizes & Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E347-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C=0.08 max | Si=0.90 max |
| Cr=18.0 – 21.0 | P=0.04 max |
| Ni=9.0 – 11.0 | S=0.03 max |
| Mo=0.75 max | Mn=0.5 – 2.5 |
| Cu=0.75 max | Nb=8xC min – 1.0 max |
Application
E347-16 is designed for welding AISI 347 and AISI 321 alloys. The columbium content acts as a stabilizer and prevents carbide precipitation.
| Deposited Chemical Composition % (Typical) | ||
| C=0.055 | Cr=19.15 | Ni=10.0 |
| Si=0.52 | Mn=1.65 | P=0.021 |
| S=0.019 | Nb=0.44 | |
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 86,500 psi |
| Tensile Strength | 58,000 psi |
| Elongation | 34.5% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E330-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C = 0.18 – 0.25 | Si = 0.90 max |
| Cr = 14.0 – 17.0 | P = 0.04 max |
| Ni = 33.0 – 37.0 | S = 0.03 max |
| Mo = 0.75 max | Mn = 1.0 – 2.5 |
| Cu = 0.75 max | |
Application
E330-16 is a fully austenitic stainless steel electrode used to weld matching composition wrought and cast alloys. Generally used for resistance to oxidation at elevated temperatures.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.21 | Cr = 15.40 | Ni = 34.10 |
| Si = 0.50 | Mn = 1.95 | P = 0.021 |
| S = 0.021 | Mo = 0.52 | |
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 85,000 psi |
| Tensile Strength | 56,500 psi |
| Elongation | 27% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Available Sizes & Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E320LR-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C = 0.03 max | Si = 0.30 max |
| Cr = 19.0 – 21.0 | P = 0.02 max |
| Ni = 32.0 – 36.0 | S = 0.015 max |
| Mo = 2.0 – 3.0 | Mn = 1.5 – 2.5 |
| Cu = 3.0 – 4.0 | |
| Nb = 8xCmin – 0.40 max | |
Application
E320LR-16 is similar in composition to type 320, with carbon, silicon, phosphorus, and sulfur controlled to lower limits. Columbium and manganese are kept to a narrow range. Low heat in put is recommended for welding.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.024 | Cr = 19.80 | Ni = 33.90 |
| Si = 0.24 | Mn = 2.05 | P = 0.011 |
| S = 0.014 | Mo = 2.40 | Cu = 3.55 |
| Nb=0.19 | ||
| Deposited All Weld Metal Properties% | |
| (Typical) As-Welded | |
| Yield Strength | 85,000 psi |
| Tensile Strength | 57,000 psi |
| Elongation | 34% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Available Sizes & Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E320-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C = 0.07 max | Si = 0.60 max |
| Cr = 19.0 – 21.0 | P = 0.04 max |
| Ni = 32.0 – 36.0 | S = 0.03 max |
| Mo = 2.0 – 3.0 | Mn = 0.5 – 2.5 |
| Cu = 3.0 – 4.0 | Nb = 8xC min – 1.0 max |
Application
E320-16 electrodes are used to weld matching composition Columbium and Manganese base material. This alloy is resistant to corrosion, especially of sulfuric acids.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.040 | Cr = 20.10 | Ni = 33.75 |
| Si = 0.52 | Mn = 1.95 | P = 0.022 |
| S = 0.019 | Mo = 2.55 | Cu = 3.55 |
| Nb=0.45 | ||
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 86,000 psi |
| Tensile Strength | 59,000 psi |
| Elongation | 33% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Available Sizes & Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E317L-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C = 0.04 max | Si = 0.90 max |
| Cr = 18.0 – 21.0 | P = 0.04 max |
| Ni = 12.0 – 14.0 | S = 0.03 max |
| Mo = 3.0 – 4.0 | Mn = 0.5-2.5 |
| Cu = 0.75 max | |
Application
E317L-16 electrodes are designed for welding 317 and 317L in all positions. The higher molybdenum content reduces the susceptibility to pitting.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.035 | Cr = 18.75 | Si = 0.55 |
| Ni = 13.0 | Mn = 1.65 | P = 0.022 |
| S = 0.019 | Mo = 3.40 | |
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 82,500 psi |
| Tensile Strength | 58,000 psi |
| Elongation | 38% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Available Sizes & Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
E317-16
Conforms to Certification: AWS A5.4 ASME SFA A5.4
Weld Process: Shielded Manual Metal Arc
| AWS Chemical Composition Requirements | |
| C = 0.08 max | Si = 0.90 max |
| Cr = 18.0 – 21.0 | P = 0.04 max |
| Ni = 12.0 – 14.0 | S = 0.03 max |
| Mo = 3.0 – 4.0 | Mn = 0.5-2.5 |
| Cu = 0.75 max | |
Application
E317-16 used for welding of dissimilar steels to carbon steel, or stainless steel to carbon steel. Stringer bead technique should be used for flat, horizontal and overhead welding, weaving technique for vertical position.
| Deposited Chemical Composition % (Typical) | ||
| C = 0.06 | Cr = 18.90 | Si = 0.52 |
| Ni = 12.95 | Mn = 1.55 | P = 0.018 |
| S = 0.022 | Mo = 3.35 | |
| Deposited All Weld Metal Properties % | |
| (Typical) As-Welded | |
| Yield Strength | 86,500 psi |
| Tensile Strength | 58,500 psi |
| Elongation | 34% |
Deposited Charpy-V-Notch Impact Properties %
Not Applicable
| Recommended Welding Parameters | |||
| Diameter | Voltage | Flat | Amperage Vertical & Overhead |
| 3/32 | 24-28 | 70-85 | 65-75 |
| 1/8 | 26-30 | 85-110 | 80-90 |
| 5/32 | 28-32 | 110-140 | 100-120 |
| 3/16 | 28-32 | 120-160 | 110-130 |
