Class: ERNiCrMo-1

AWS: A5.14

Conforms to Certification: AWS A5.14            ASME SFA A5.14

Weld Process: GTAW Welding Process

AWS Chemical Composition Requirements
C = 0.05 max	Cu = 1.5 – 2.5
Mn = 1.0 – 2.0	Ni = Remainder
Fe = 18.0 – 21.0	Co = 2.5 max
P = 0.04 max	Cr = 21.0 – 23.5
S = 0.03 max	Nb + Ta = 1.75 – 2.50
Si = 1.0 max	Mo = 5.5 to 7.5
Other = 0.50 max	W = 1.0 max

Please Call For More Information and Available Sizes

Application
ERNiCrMo-1 is used for welding nickel-chromium-molybdenum base materials. Can use the GTAW, GMAW, welding processes for cladding steel with the ERNiCrMo-1 weld material.

Deposited Chemical Composition % (Typical)
C = 0.03	Cr = 22.0	Ni = Remainder
Mn = 1.5	Cu = 2.0	Mo = 6.50
Fe = 20.5	Nb/Ta = 2.1

 

Deposited All Weld Metal Properties % (AW)
Tensile Strength	97,000 psi
Elongation	34.5%

Deposited Charpy-V-Notch Impact Properties %
Not applicable

Recommended Welding Parameters for TIG, MIG, and SAW Welding of Nickel Alloys
Process	Diameter of Wire	Voltage (V)	Amperage (A)	Gas
Tig	.035 inches x 36	12 – 15	60 – 90	100% Argon
	.045 inches x 36	13 – 16	80 – 110	100% Argon
	1/16 inches x 36	14 – 18	90 – 130	100% Argon
	3/32 inches x 36	15 – 20	120 – 175	100% Argon
	1/8 inches x 36	15 – 20	150 – 220	100% Argon

Note:  Other shielding Gases may be used for Tig welding. Shielding gases are chosen taking Quality, cost, and Operability into consideration.
Note:  Both agglomerated and fused fluxes can be used for submerged arc welding.
Note: The chemical composition of the flux mainly affects the chemistry of the weld metal and consequently its corrosion resistance and mechanical properties.